By:
TAB
On:
25/08/2010 |
This error will be shown on the screen on blue background as STARTUP ERROR during booting of the machine if the cctalk Machine Dongle cannot be found.
Most reason for this error is a cold soldered connection on the cctalk Dongle of the machine.
It is connected on the coin mech.
Please remove the black shrinkable tubing and check the soldering connections of the cables (see attachment).
This error will also occur if the 50 pin connector is not connected perfectly on the PC or if there is a problem on the cctalk cables
(3 cables where the coin mech is connected, too)
Fileattachment:  Resolder TAB cctalk dongle 1.1.pdf |
| |